Carrier Code; Manage The Area Code; Network Type - Philips ID9650B/12 User Manual

Carrier code

Note
•
This feature only applies to models with carrier
code support.
Some service providers require a carrier code
to be added when you make a call outside the
local area. This feature can decide automatically
if a carrier code is needed when you return a
call from the incoming call log.
Tip
•
The carrier code contains 2 or 3 digits.
For more information, contact the service
provider.
Activate the carrier code
1
Press menu.
2
Select [ADVANCED SET] > [CARRIER
CODE], then press [SELECT].
3
Enter the carrier code, then press [OK]
to confirm.
The setting is saved.
»
Deactivate the carrier code
1
Press menu.
2
Select [ADVANCED SET] > [CARRIER
CODE], then press [SELECT].
3
To delete all digits, press [CLEAR], then
press [OK] to confirm.
» The setting is saved.

Manage the area code

Note
•
This feature only applies to models with area
code support.
EN
18
You can define an area code (up to 5 digits).
This area code is automatically removed from
an incoming call if it matches with the code you
define. Then the phone number is saved in the
call log without an area code.
Activate auto removal of the area
code
1
Press menu.
2
Select [ADVANCED SET] > [AREA
CODE], then press [SELECT] to confirm.
3
Enter the area code, then press [OK] to
confirm.
The setting is saved.
»
Deactivate auto removal of the area
code
1
Press menu.
2
Select [ADVANCED SET] > [AREA
CODE], then press [SELECT] to confirm.
3
Press [CLEAR] to delete all the digits.
4
Press [OK] to confirm.
The setting is saved.
»

Network type

Note
•
This feature only applies to models with
network type support.
1
Press menu.
2
Select [ADVANCED SET] >
[NETWORK TYPE], then press
[SELECT].
3
Select a network type, then press
[SELECT].
The setting is saved.
»