11 Call features
The phone supports a number of call-related
features that help you handle and manage the
calls.
Auto hang up
To end a call, simply place the handset on the
base station or charge cradle.
Activate/Deactivate auto hang up
1
Press MENU.
2
Select [PERSONAL SET] > [AUTO
HANG-UP], then press [OK] to confirm.
3
Select [ON]/[OFF], then press [OK] to
confirm.
The setting is saved.
»
Note
•
When the auto hang up is off, the speaker is
on automatically.
Auto conference
To join an external call with another handset,
press
.
Activate/Deactivate auto conference
1
Press MENU.
2
Select [ADVANCED SET] >
[CONFERENCE], then press [OK] to
confirm.
3
Select [ON]/[OFF], then press [OK] to
confirm.
The setting is saved.
»
EN
26
Dial mode
Note
•
This feature only applies to models that
support both tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Press MENU.
2
Select [ADVANCED SET] > [DIAL
MODE], then press [OK] to confirm.
3
Select a dial mode, then press [OK] to
confirm.
»
The setting is saved.
Note
•
If your phone is in pulse dial mode, press
during a call for temporary tone mode. 'd'
displays. Digits entered for this call are then
sent out as tone signals.
Carrier code
Note
•
This feature only applies to models with carrier
code support.
Some service providers require a carrier code
to be added when you make a call outside the
local area. This feature can decide automatically
if a carrier code is needed when you return a
call from the incoming call log.
Tip
•
The carrier code contains 2 or 3 digits.
For more information, contact the service
provider.