Advertisement
1
Charge
Install the handset
1
The batteries are pre-installed in the handset. Follow
the direction of the arrow printed on the battery tape
and pull it off from the battery door before charging.
2
Place the handset on the charging cradle to charge the
handset.
Note
Charge the batteries for 24 hours before first use.
For more information on the battery icon status, see the
User Manual.
Ensure the handset and base station are powered on and
linked before you can charge the handset.
Configure your phone (if necessary)
1
Set the date and time.
The phone is now ready to use.
»
2
Enjoy
Make a call
ECO mode
1
Press
and dial the phone number; or
The
power of the handset and base station.
2
Dial the phone number and press
to
dial out the call.
1
2
Answer a call
1
When the phone rings, press
or
to
3
answer the call.
Adjust the earpiece volume
1
Press
or
to adjust the volume
Note
during a call.
Set the handset's ringtone
You can select from 20 ringtones.
1
Press
menu
.
2
Select
>
[PERSONAL SET]
[HANDSET
TONES]
>
[RING TONES]
, then press
[SELECT]
to confirm.
3
Select a ringtone, then press
[SELECT]
to confirm.
The setting is saved.
»
Online help:
Troubleshooting
No dialing tone
[ECO]
mode reduces the transmission
•
Check your phone connections.
The handset is out of range. Move it closer to the base station.
Press menu.
Select
[ADVANCED SET]
>
[ECO]
, then
The signal icon flashes
press
to confirm.
[SELECT]
•
The handset is out of range. Move it closer to the base station.
Select the new setting, then press
If the handset displays [UNREGISTERED], register the handset.
to confirm.
[SELECT]
The caller ID does not display
The setting is saved.
»
[ECO]
is displayed instead of in
»
•
The service is not activated. Check with your service provider.
standby mode.
The caller's information is withheld or unavailable.
For more information, see the User Manual.
When the
mode is activated,
[ECO]
the connection range between the
handset and the base station can be
reduced.
www.philips.com/support
Advertisement
