Pump Casing Cleaning - Honda WT40 Owner's Manual

SERVICING YOUR PUMP

PUMP CASING CLEANING

After each use, clean the inside of the pump casing using the following
procedure:
Removal:
1. Remove the drain plug from the pump cover using the wrench to drain the
water inside.
2. Loosen the pump cover knobs
using the wrench.
3. Remove the pump cover and the
volute case from the pump
casing, and remove any debris
from pump casing and volute
case.
40
WRENCH
WRENCH
PUMP CASING
WRENCH
DRAIN PLUG
KNOBS (4)
KNOBS (4)
O-RING
VOLUTE
CASE
PUMP COVER