Exhaust System - Echo SRM-2620T Operator's Manual

SRM-2620T

Exhaust System

Spark Arrestor Screen
Level 2.
Parts Required:
1. Remove muffler cover (B).
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from entering
cylinder.
3. Remove spark arrestor screen
cover (C), gasket (E), and screen
(F), from muffler body.
4. Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic
element inside muffler.
5. Replace screen if it is cracked,
plugged, or has holes burned
through.
6. Assemble components in reverse
order.
Exhaust Port Cleaning
Level 2.
Parts Required:
1. Remove spark plug lead
from spark plug, and
remove muffler cover.
2. Place piston at top dead
center. Remove muffler (A)
and heat shield (B).
3. Use a wood or plastic
scraping tool to clean
deposits from cylinder
exhaust port.
X7502341000
© 1/2016 ECHO Inc.
Spark Arrestor Screen, Gasket
As needed: Heat Shield
MAINTENANCE
E
B
F
C
A
33