MAINTENANCE
Parts Required:
To maintain proper engine operating temperatures, cooling air must pass
freely through the cylinder fin area. This flow of air carries combustion
heat away from the engine.
Overheating and engine seizure can
occur when:
• Air intakes are blocked, preventing
cooling air from reaching the cylinder.
• Dust and grass build up on the
outside of the cylinder. This build up
insulates the engine and prevents the
heat from leaving.
Removal of cooling passage blockages
or cleaning of cooling fins is considered
"Normal Maintenance." Any failure
attributed to lack of maintenance is not
warranted.
1.
Remove spark plug lead.
2.
Remove muffler cover (A).
3.
Remove engine cover (B).
DO NOT use a metal scraper to
remove dirt from the cylinder fins.
4.
Use brush to remove dirt from the
cylinder fins.
5.
Remove grass and leaves from the
grid between the recoil starter and
fuel tank.
6.
Assemble components in reverse
order.
32
None if you are careful.
SRM-2620T
B
© 1/2016 ECHO Inc.
A
X7502341000