HYCON HRD30 Operating Manual

Hydraulic rock drill
Hide thumbs Also See for HRD30:

Advertisement

Quick Links

Hydraulic Rock Drill
HRD30
From serial
number 18328
Revised
18.12.2020
Prior to Operation
We thank you for choosing a
HYCON rock drill.
To ensure smooth operation
and long-lasting performance
of your new tool, we re-
commend you to study this
operating manual carefully and
pay special attention to the
chapters about
Safety and Service
Precautions
and
Service/Maintenance
We hope you will be satisfied
with your new HYCON rock
drill.
Best regards
HYCON A/S
HYCON A/S
Juelstrupparken 11
DK-9530 Støvring
Denmark
Tel: +45 9647 5200
Fax: +45 9647 5201
Mail
hycon@hycon.dk
www.hycon.dk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HRD30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HYCON HRD30

  • Page 1 Safety and Service Precautions Service/Maintenance HYCON A/S Juelstrupparken 11 DK-9530 Støvring We hope you will be satisfied Denmark with your new HYCON rock drill. Tel: +45 9647 5200 Fax: +45 9647 5201 Mail hycon@hycon.dk Best regards www.hycon.dk HYCON A/S...
  • Page 2 This page is intentionally left blank.
  • Page 3: Table Of Contents

    Contents Page Safety Precautions ....................2 Oil Flow and Pressure ..................4 Starting Instructions .................... 4 Technical Data ....................5 Performance Chart ....................6 Integrated Air Supply ..................6 Connection to Hydraulic Power Sources ..............7 Service and Maintenance ..................8 Oil Types ......................
  • Page 4: Safety Precautions

    Safety Precautions • Read the rock drill and power source operating manuals prior to use. • Only use the rock drill in accordance with the local working regulations on allowed working time • Check the oil flow to the rock drill. The oil flow may not exceed 30 l.p.m. •...
  • Page 5 • Always make sure that the rock drill labels and warning signs are legible. • Always use hoses, couplings and spares as such recommend by HYCON A/S. • Repairs may only be carried out by experienced personnel.
  • Page 6: Oil Flow And Pressure

    A too high oil flow and/or a too high pressure results in overload of the rock drill, meaning that the lifetime of your new HYCON tool will not be as expected, and that your service and repair costs will be too high.
  • Page 7: Technical Data

    Max. oil temperature 70° C Tool chuck size 22x108 mm Built in compressor air supply 8 m³/hr. Under water use Please contact your HYCON dealer Vibration level 3 axis (ISO 20643) 13.0 m/s² Uncertainty (K) 2.5 m/s² Sound power level L guaranteed...
  • Page 8: Performance Chart

    HYCON dealer to check for worn out vanes. The rock drill can be modified for external air. Please contact your HYCON dealer Side 6 af 16...
  • Page 9: Connection To Hydraulic Power Sources

    If the output of the power source is too high: • the power source must be adjusted to correct output • or you can choose to mount a HYCON oil flow divider to protect the rock drill against overload • or you can choose one of our HYCON powerpacks. Your dealer can guide you in choosing the right powerpack.
  • Page 10: Service And Maintenance

    Air filter replacement required, clean filter housing, open compressor and clean rotor and rotor housing, replace vanes. Our service kit with HYCON part no. 9013500 covers the 25 hour and 50 hour services in one kit. The air filter might be filled earlier and require earlier replacing when drilling in areas with low ventilation, in moist weather or when drilling in softer materials like concrete or limestone.
  • Page 11: Oil Types

    Replacement of gear box grease Replacement of every seals and o-rings Oil Types The HYCON power packs use standard hydraulic oil, i.e. all types of mineral oil and biodegradable oil, which comply with the following values: Below 10°C 10 … 30°C Above 30°C...
  • Page 12: Ec-Declaration Of Conformity

    Tel: +45 9647 5200 Fax: +45 9647 5201 Mail hycon@hycon.dk www.hycon.dk From serial No. We hereby declare that HRD30 hydraulic rock drill 18328 (service weight 32 kg) is manufactured in conformity with the EC Directive 2006/42/EC. HYCON A/S Juelstrupparken 11 DK-9530 Støvring...
  • Page 13: Warranty Terms

    Warranty Terms We grant 12 months warranty from the first date of operation – however, not more than 18 months from the date of delivery. The warranty applies to faults that can be related to construction and production errors. Faults caused by incorrect operation, incorrect handling, lack of maintenance or the like, will not be accepted as warranty.
  • Page 14 This page is intentionally left blank. Side 12 af 16...
  • Page 15: Spare Parts List

    This page is intentionally left blank. Side 13 af 16...
  • Page 16 Side 14 af 16...

Table of Contents