Victron energy ORI303100000 Manual page 12

Charging current limiter
The output current is determined by the following factors:
Setting:
Temperature:
Wiring diagram
Alternator
TSConfig application
The Buck-Boost converters can be configured extensively with TSConfig software. This software also includes a
monitor window, where real-time operation of the converter can be tracked.
The following image shows a screenshot of the TSConfig software:
The TSConfig software and manual can be downloaded from:
downloads/software
10
The maximum desired charging current is set via the USB connection
(with the Windows application TSConfig).
If the converter temperature comes close to the set maximum temperature, the charging
current is automatically limited. As a result, the temperature of the Buck-Boost inverter is
never inadmissibly high.
50A
100A
Starter
Battery
Service battery
https://www.victronenergy.com/support-and-