Activating/Deactivating Wi-Fi - Bosch WT45N202GB Installation And Operating Instructions Manual

Home Connect
en
Turn the programme selector to
3.
position 3.
'˜˜ (connect to app) will appear on
the display.
Press Start/Pause A.
4.
The appliance will now connect to your
Home Connect app.
Open the Home Connect app on
5.
your smartphone or tablet PC and
select Connect to add your new
appliance.
If your smartphone or
Note:
tablet PC is still connected to the
Home Connect network, you will
need to connect it to your home
network first.
If your appliance is not shown
6.
automatically, select Appliance
search and then Connect an
appliance in the
Home Connect app.
Carry out the last steps in the
7.
Home Connect app to connect your
appliance.
If the appliance has connected to your
home network successfully, '©Ÿ
(connected) will appear on the display.
Press Remote Start } briefly to exit
8.
the Home Connect settings.
If a connection could not be
Note:
established, "§§ (fault) will appear on
the display. Check whether your
smartphone or tablet PC is in range of
your home network and whether it is
connected to it. Try connecting to the
Home Connect app again.
36

Activating/deactivating Wi-Fi

You can switch the Home Connect
function on your appliance on or off
permanently at any time.
Switch on the appliance.
1.
Press and hold Remote Start } for
2.
at least 3 seconds.
'ž£ (connect automatically) will
appear on the display.
Turn the programme selector to
3.
position 4.
'©Ÿ (Wi-Fi function) will appear on
the display.
Press Start/Pause A.
4.
If ©Ÿ (switched on) appears on the
display, the Wi-Fi function on the
appliance has been activated. If
©"" (switched off) appears on the
display, the Wi-Fi function is not active.
Press Remote Start } briefly to exit
5.
the Home Connect settings.