Furuno GP170D Installation Manual page 10

1. MOUNTING
1.1.2 Flush mounting, fixed at front
An optional flush mount kit type F is required. For details, see the outline drawing at
end of this manual. (Name: Flush Mount Kit F, Type: OP20-41, Code No.:001-243-
900)
Name
Self-tapping screw 5 20 SUS304
Hex.bolt
Spring washer
Cosmetic panel
1.1.3 Flush mounting, fixed at rear
An optional flush mount kit type S is required. (Name: Flush Mount Kit S, Type: OP20-
40, Code No.: 001-243-890)
Name
Wing bolt
Hex. bolt
Wing nut
Spring washer
Flush mount metal
1. Prepare a cutout in the mounting location whose dimensions are 242 (W) X 152
(H) mm.
2. Insert the unit to the cutout.
3. Attach two flush mount metals to the unit with two hex bolts (M6 12) and two
spring washers
4. Screw four wing bolts to wing nut.
5. Fasten the unit with wing bolts assembled at step 4, and then tighten nuts.
1-2
Type Code No
000-162-608-10
M6 12 SUS304 000-162-897-10
M6 SUS304 000-158-855-10
20-035-1061 100-380-480-10
Type Code No.
M4 30 YBSC2 000-168-243-10
M6 12 SUS304 000-162-897-10
M4 YBCS2 000-168-239-10
M6 SUS304 000-158-855-10
20-035-1062 100-381-290-10
Qty
4
2
2
1
Qty
4
2
4
2
2