Table of Contents
Advertisement
Basics
2
Place the device you want to charge onto the touchpad with
the device's back facing.
• W hen charging starts, a notification sound or vibration
will occur.
• T he location of the wireless charging coil may vary by
device model. Adjust the devices to connect with each
other properly.
3
When you are finished charging, press and hold the Fn key
and press the F11 key to deactivate the Wireless Power Share
feature.
Alternatively, disconnect the other device from your
computer. After disconnecting the charged device from the
touchpad, the Wireless Power Share feature will automatically
turn off after a minute.
Precautions for sharing power
• D o not place the device on the touchpad with a credit
card or radio-frequency identification (RFID) card (such
as a transportation card or a key card) placed between
the touchpad and the other device.
• D o not place the device on the touchpad when
conductive materials, such as metal objects and
magnets, are placed at the back of the device to be
charged. The device may not charge properly or may
overheat, or the device may be damaged.
• O nly devices that support the wireless charging feature
can be charged using this feature. Some devices may not
be charged.
• T o charge properly, do not move or use either device while
charging.
• T he power charged to the other device may be less than
the amount shared to it by your computer.
• I f you charge the other device while charging your
computer, the charging speed may decrease or the device
may not charge properly depending on the charger type.
• T he charging speed or efficiency may vary depending on
the computer's condition or the surrounding environment.
• I f the remaining battery power drops below a certain level,
power sharing will stop.
38
Advertisement
Table of Contents
