Fig. 50: Fitting The Spinner Nose Cone (25012); Table 34: Tightening Torque (25013) - ABB HT575751 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.9 Installing the cartridge group
Fig. 50: Fitting the spinner nose cone (25012)
Part number
25013
Table 34: Tightening torque (25013)
5. Fit the spinner nose cone and secure with washer (25014) and screw. Counterhold the
compressor wheel (25000) by hand and tighten the screw. Observe the tightening
torque.
6. Measure distance Z between spinner nose cone and compressor wheel at no less than
three points around the circumference.
Permissible distance Z:
Permissible difference of the measurements:
© Copyright 2017 ABB. All rights reserved.
A170-M
M8
20 Nm
0.1 – 0.7 mm
± 0.1 mm
HZTL4033_DE
A175-M
M10
40 Nm
Revision B December 2017