Installation - Acer CB281HK User Manual

Installation

To install the monitor on your host system, please follow the steps below:
Steps
1 Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the VGA video cable to the computer.
c Connect the digital cable
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the DVI cable to the back of the
monitor and the other end to the computer's port.
d HDMI Cable (Only HDMI or MHL Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI or MHL cable to the computer.
2 Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor
3
on the computer with the audio cable.
Turn on the monitor and computer
4
Turn on the monitor first, then the computer. This sequence is very
important.
5
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
9
2