LG 20CAV37K Owner's Manual page 49

Reset Tab
The Reset tab allows the administrator to reset all
configurable parameters stored in Flash.
NOTE
The Reset function can also be accessed
y y
through the Webpage Administration Inter-
face.
<Figure 2-37: Reset>
y Reset Parameters
Pressing the Reset Parameters button will reset all
settings and options to the factory default settings.
When this button is pressed, an OSD message is
displayed. This is to prompt the administrator and
prevent accidental reset.
Using CLOUD Solution
Diagnostics Window
In the Diagnostics window, the administrator can
access the window tab to diagnose the portal. The
Diagnostics window has the following tabs:
y Event Log
y Session Statistics
y PCoIP Processor
y Ping
Each tab has the Close button to close the window.
Event Log Tab
The Event Log tab allows the administrator to view
and delete the event log messages from the portal.
NOTE
The event log (regardless of the quantity)
y y
can also be reset using the Webpage Admin-
istration Interface.
<Figure 2-38: Event Log>
y View Event Log Message
The View Event Log Message field displays the log
messages accompanied by the timestamp informa-
tion. The following two buttons are available:
y Refresh
The Refresh button refreshes the displayed event
log messages.
y Clear
The Clear button clears all event log messages.
49