Table of Contents
Advertisement
<Figure 2-29: Advanced Settings for View Connec-
tion Server + Imprivata OneSign Connection>
y Onesign Desktop Name Mode
Select whether the Desktop Name to Select prop-
erty is used in OneSign Mmode :
Ignore the Desktop Name to Select field
Use the Desktop Name to Select field if set
y Desktop Name to Select
Enter the desktop name. When the desktop pool
list includes a pool with this name, the client will
immediately start a session with that pool.
y Remember Username
If this option is selected, the username which is
previously used to access the VMware View
Connection Server is automatically entered in the
username field.
y Use OSD logo for View banner
If this option is enabled, you can change the OSD
logo of PCoIP during the login.
NOTE
The OSD logo can be uploaded using the
y
y
Webpage Administration Interface.
y Prefer GSC-IS
If this option is selected, the GCS-IS interface
is used when a smart card supports more than
one interface. If the smart card supports only one
interface, it is not used.
NOTE
This setting is provided only when a smart
y
y
card is used.
Using CLOUD Solution
y Enable Peer Loss Overlay
If this option is selected, the "Network Connection
Lost" message is displayed on the screen when it
is confirmed that the network is disconnected.
The display is the same as in the VDI environ-
ment. The default is Disable.
NOTE
This setting is provided only for the client.
y
y
y Enable Preparing Desktop Overlay
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when the
user is logged in.
y Disconnect Message Filter
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
y Connection Management Interface
In the Connection Management Interface setting,
you can manage the connection by entering the IP
address for connection management instead of us-
ing the IP address of the VMware View Connection
Server and can select to enable or disabled the
management interface.
<Figure 2-30: Connection Management Interface
Setting>
y DNS Name or IP Address
Enter the DNS name or IP address of the VMware
View Connection Server.
45
Advertisement
Table of Contents
