LG CBV42 Owner's Manual page 21

Prefer GSC-IS
y
If this option is selected, the GSC-IS interface
is used when a smart card supports more than
one interface. If the smart card supports only one
interface, it is not used.
NOTE
This setting is provided only when a smart
y
card is used.
Enable Peer Loss Overlay
y
If this option is selected, the "Network Connection
Lost" message is displayed on the screen when it
is confirmed that the network is disconnected.
The display is the same as in the VDI environ-
ment. The default is Disable.
NOTE
This setting is provided only for the client.
y
Enable Preparing Desktop Overlay
y
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when the
user is logged in.
Disconnect Message Filter
y
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
y View Connection Server + Kiosk
Select View Connection Server + Kiosk to use
the kiosk mode. You can configure the View Con-
nection Server + Kiosk mode using the Webpage
Administration Interface.
NOTE
You cannot use the kiosk mode by connect-
y
ing to the host PC.
<Figure 2-20: View Connection Server + Kiosk
Setting>
DNS Name or IP Address
y
Enter the DNS name or IP address of the VM-
ware View Connection Server.
Username
y
Select the type of username that matches the de-
vice name used in the VMware View Con-
nection Server.
Password
y
Enter the password for the user client.
Using CLOUD Solution
21