Table of Contents
Advertisement
Sensor Cook (Auto Menu 1 - 9)
This feature allows you to cook most of your favourite foods without having to select cooking times and power
levels . The oven does it all automatically .
Use of Accessory:
Ceramic Tray
2
Select Menu
.
Category and "PRESS START"
appears in the display window .
3
Press
.
After the burst of steam is
detected by the SENSOR,
the remaining cooking time appears
in the display and begins to
count down .
Do not open the door until the
remaining cooking time appears in
the display window .
During cooking, the oven will beep
and scroll "STIR" or "REARRANGE"
( - 5, 7, 9) or "TURN OVER" or
"REARRANGE" (8) to signal that
the food needs to be stired or
rearranged or turned .
For best results, follow these recommendations:
.The Sensor Cook works by detecting the amount of steam generated by the food being
cooked . From the generated steam, the oven then calculates the remaining cooking time .
2 .When an Auto Program has been selected, the category will appear in the display window .
3 .The door should not be opened before the time appears in the display window .
4 .When cooking time is longer than 60 minutes, the time will appear in hours and minutes .
5 .Do not use plastic dishes as a secure seal cannot be achieved and inaccurate results may occur .
6 .If the oven has been previously used on CONVECTION, COMBINATION or GRILL, and it is too hot to be
used on a Sensor Program, a "HOT" will appear in the display window . The cooling fan will operate to cool
the oven rapidly . After the "HOT" disappears, the program may be used . If you are in a hurry, cook food
manually i .e . select Micro Power Level and cooking time yourself .
To Cook by Auto Menu
-24-
1
Press
.
More/Less pad
Preferences for food doneness
vary with each individual . After
having used Sensor Cook a few
times, you may decide you would
prefer your food cooked to a
different doneness . By using the
More/Less pads, the programs
can be adjusted to cook food for
a longer or shorter time .
Press More/Less pads after
selecting category and before
pressing Start pad .
tap = More
2 taps = Less
3 taps = Original setting
Advertisement
Table of Contents
