Subscribe to Our Youtube Channel
Related Manuals for eSky wireless ES102
Summary of Contents for eSky wireless ES102
- Page 1 Suzhou eSkywireless Inc. ES102 user manual ES102 user manual Suzhou eSkywireless Inc. http://www.eskywireless.com...
- Page 2 Suzhou eSkywireless Inc. ES102 user manual Information to User This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 3 Suzhou eSkywireless Inc. ES102 user manual 1 PREPARE before INSATLLATION 1.1 Product Display （image of ES102） （wire harness of ES102） 1.2 Packaging Inspection http://www.eskywireless.com...
- Page 4 1.3 Install SIM Card 1.3.1 Selection of SIM Card The ES102 is a GPS/GPRS terminal, and it needs a GSM/GPRS SIM card. please reference dealer’s opinion to select carrier. 1.3.2 Installation SIM card Open the terminal cover, and put the metal side of SIM card face down and then fasten the card slot cover.
- Page 5 Suzhou eSkywireless Inc. ES102 user manual 1)select the comm port of PC through which ES102 is connected with PC, as the follows 2) In Port Settings, change communication speed (bits per second) to 115200bps, 3)Final step is the certain AT settings necessary after 1 running of downloaded program.
- Page 6 Suzhou eSkywireless Inc. ES102 user manual http://www.eskywireless.com...
-
Page 7: Install And Operation
Suzhou eSkywireless Inc. ES102 user manual 3 INSTALL and OPERATION 3.1 Installation Method The terminal is GPS positioning products, it is recommended that you follow the instructions to install. Note: 1) The following installation order, please do not inverted. 2) During the installation process, please do not supply the terminal. - Page 8 Suzhou eSkywireless Inc. ES102 user manual Battery connector ① Power connector, connecting terminal with the power connector of wire harness, as picture ② above. I/O connector, connecting terminal with the I/O connector of wire harness, as picture above. ③ I/O lines ④...
- Page 9 Suzhou eSkywireless Inc. ES102 user manual 3.3 Installation Notes ① Avoid put together with the emission source, for example, reversing radar, anti-theft devices and other on-board communications equipment. ② As for fixing the terminal, you can bound with ties or stick with wide sponge strength double-faced adhesive.
Need help?
Do you have a question about the ES102 and is the answer not in the manual?
Questions and answers