Download
Share
Print this page
Sanus VLT6 Instruction Manual
  1. Manuals
  2. Brands
  3. Sanus Manuals
  4. TV Mount
  5. VLT6
  6. Instruction manual

Sanus VLT6 Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
VLT 6
INSTRUCTION MANUAL
GET IT
RIGHT
THE FIRST TIME
Follow this step-by-step
instruction manual to
speed up your installation.

Advertisement

loading

Related Manuals for Sanus VLT6

Summary of Contents for Sanus VLT6

  • Page 1 GET IT RIGHT THE FIRST TIME Follow this step-by-step VLT 6 instruction manual to speed up your installation. INSTRUCTION MANUAL...

  • Page 2: We're Here To Help

    Our US-based install experts shows how easy this DIY HeightFinder™ shows you are standing by to help. project will be? where to drill. Call us at: 800-359-5520 Watch it now at: Check it out at: SANUS.com/2560 SANUS.com/1172 Or, chat at: SANUS.com/chatSP...
  • Page 3 Yes — This mount is NOT compatible. 110 lbs. 150 lbs. Solid Concrete or Stud Walls weigh more Visit MountFinder.Sanus.com or call 1-800-359-5520 (49.8 kg) (68.0 kg) Concrete Block Walls than (UK: 0800-056-2853) to fi nd a compatible mount. Solid concrete...

  • Page 4: Before You Begin

    Before you begin Don’t stress out Remove the stand Install any accessories when you see from your TV — if attached. you may have purchased — if they all the hardware included. require the TV to be removed from the Extra TV screw sizes and lengths wall for assembly.
  • Page 5 Step-by-Step illustrations Read ALL CAUTION Protect the face warnings. of your TV speed up your installation. when laying it down for installation. These are IMPORTANT! Don’t get it? Read the detailed explanation below each step. CAUTION: ASSEMBLE Avoid potential Soft clean surface Read Important Stuff read read rea Must Read read read read read read Read read read Safety First read re...
  • Page 6 STEP 1 Attach TV Bracket to TV WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
  • Page 7 1.1 Select TV Screws 1.2 Determine Spacer Need TV Bracket TV Bracket Flat Back Cables Round Back Inset Holes TV Bracket TV Bracket TV Bracket Too Short Correct Too Long For flat-back TVs, no For rounded-back TVs, cable interference or CAUTION: inset holes, spacers spacers...
  • Page 8 1.3 Attach TV Bracket Assembly to TV POSITION SECURELY TIGHTEN Flat-back TVs Rounded-back TVs / Extra Space tilt tension knob TV brackets TIP: should be oriented to the outside edges. Center the TV brackets over your TV's mounting hole Install using the spacer, screw and washer combination you pattern - making sure the brackets are at the same height.
  • Page 9 STEP 2 Attach Wall Plate to Wall WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
  • Page 10 STEP 2A Wood Stud Installation CAUTION: Avoid potential Min. 1 ½ in. (3.8 cm) personal injury or property damage! ● Drywall covering the wall Min. 16 in. (40.6 cm) Min. 3 ½ in. (8.9 cm) must not exceed 5/8 in. (1.5 cm) ●...
  • Page 11 CAUTION: TIP: Be sure you drill into the CENTER of the stud. our HeightFinder at sanus.com [www.sanus.com/1172]. Place the wall plate template at your desired height and position the Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.

  • Page 12: Remove Template

    STEP 2A (continued) REMOVE TEMPLATE SECURELY TIGHTEN CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate . Ensure the wall plate is securely fastened to the wall before continuing on to the next step. Install the four lag bolts and firmly tighten until they are Remove the wall plate template and discard.
  • Page 13 Min. 16 in. (40.6 cm) To calculate your precise wall plate location, check out TIP: TIP: our HeightFinder at sanus.com [www.sanus.com/1172]. Position the wall plate template on the wall at your desired height. Level and mark the hole locations.
  • Page 14 STEP 2B (continued) DRILL REMOVE TEMPLATE 3 in. (7.6 cm) 3/8 in. (10 mm) CAUTION: CAUTION: Never drill into the mortar between blocks. Never drill into the mortar between blocks. Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit. Remove the wall plate template and discard.
  • Page 15 INSERT ANCHORS SECURELY TIGHTEN CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent Be sure the anchors are seated fl ush unwanted movement of the wall plate . Ensure the wall plate is CAUTION: CAUTION: with the concrete surface.
  • Page 16 STEP 2C Steel Stud Installation Kit (NOT INCLUDED) CAUTION: Avoid potential personal injury or property damage! Min. 16 in. (40.6 cm) ● Studs must be at least 2x4 / 25 ga. 1/4-20 x 1.75 ● If back side of wall is unfi nished, drywall must be installed to a minimum .734 x .312 x .065 in.
  • Page 17 CAUTION: TIP: Be sure you drill into the CENTER of the stud. our Height Finder at sanus.com [www.san.us/1172]. Drill the four pilot holes using a 1/2 in. (13 mm) diameter drill bit. Place the wall plate template at your desired height and position the IMPORTANT: Pilot holes must be drilled to a depth of 1 in.
  • Page 18 STEP 2C (continued) INSTALL ANCHORS SECURELY TIGHTEN CAUTION: Avoid potential personal injury or property damage! All four screws MUST BE firmly tightened to prevent CAUTION: Be sure cap unwanted movement of the wall plate . Ensure the wall plate is seated against the drywall surface.
  • Page 19 STEP 3 Attach TV to Wall Plate HANG ATTACH HEAVY! You may need assistance with this step. CAUTION: CAUTION: Avoid potential personal injury or property damage! Avoid potential personal injury or property damage! For CONCRETE APPLICATIONS: Always make sure TV brackets are in the locked TV brackets MUST remain centered in wall plate...

  • Page 20: Install Cables

    Manage Cables INSTALL CABLES TIP: TIP: Extend the TV outward AND tilt the TV up or down to gain better access to the back of the TV. Move your TV to various positions, as needed to attach your cables, then adjust the TV as desired.
  • Page 21 Adjustments LEVEL HEIGHT To level your TV, turn Adjust the height the level adjustment by turning the level screw on the top adjustment screw RAISE LOWER of either TV bracket on the top of both TV RAISE RAISE to raise or brackets LOWER LOWER...
  • Page 22 TILT EXTEND / RETRACT Your TV should adjust easily when moved, then stay in place. Adjust the tilt tension knob your TV naturally tilts up or down. NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the CAUTION: Avoid potential...
  • Page 23 TV LATERAL SHIFT REMOVING THE TV HEAVY HEAVY ! You may need assistance with this step. ! You may need assistance with this step. Disconnect all cables from the TV. CAUTION: Avoid potential To unlock the TV from the wall plate: Pull down and hold both release tabs while gently pulling personal injury or property damage!

  • Page 24: Troubleshooting

    Troubleshooting If you are uncertain about your hardware selection, contact Customer Service at 1-800-359-5520. TV Supplied TV supplied spacers Spacers : Use your TV supplied spacer/adapter for flat back TVs : Use your TV supplied spacer/adapter and spacer for: (AND you want your TV closer to the wall).
  • Page 25 Dimensions in. [mm] TV INTERFACE 600mm 200mm 23.62in 7.87in 430mm 16.93in WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 12deg 609.6mm 1" HEIGHT ADJUST 24.00in 600mm 23.62in 406.4mm 241.3mm 16.00in 9.50in 144.8mm 5.70in 177.8mm 8.4mm 7.00in .33in 7deg 450mm 17.72in 668mm...
  • Page 26 En paredes Sí. Este soporte NO es compatible. (incluidos los 68,0 kg 49,8 kg hormigón sólido o con montantes Visite MountFinder.Sanus.com o llame al 1-800-359-5520 pesa accesorios) bloques de hormigón de acero (150 lb) (110 lb) (Reino Unido: 0800-056-2853) para encontrar un soporte más de...

  • Page 27: Antes De Comenzar

    Español ¡ESTAMOS AQUÍ PARA AYUDARLE! ¿Desea ver un video para comprobar lo fácil que es hacerlo usted mismo? SANUS.com/2560 Visualícelo ahora en: Acierte a la primera. HeightFinder™ le indica el lugar donde debe taladrar. SANUS.com/1172 Descúbralo en: Nuestros expertos en instalación de EE. UU. están listos para ayudar.
  • Page 28 Español PASO 1 Fijar el soporte del televisor al televisor PÁGINA 6 ADVERTENCIA: Este producto contiene piezas pequeñas que, en caso de ser tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase en contacto con el servicio de atención al cliente.
  • Page 29 COLOCAR LA PLANTILLA CONSEJO: Para calcular la ubicación concreta de la placa mural, pruebe nuestra herramienta HeightFinder disponible en sanus.com [www.sanus.com/1172]. Coloque la plantilla de la placa mural a la altura que desee y ubique los orificios muescados sobre las líneas centrales del montante. Nivele y marque la ubicación de los orificios.
  • Page 30 COLOCAR LA PLANTILLA CONSEJO: ara calcular la ubicación concreta de la placa mural, pruebe nuestra herramienta HeightFinder disponible en sanus.com [www.sanus.com/1172]. Coloque la plantilla de la placa mural en la pared a la altura que desee. Nivele y marque la ubicación de los orificios.
  • Page 31 COLOCAR LA PLANTILLA CONSEJO: Para calcular la ubicación concreta de la placa mural, pruebe nuestra herramienta HeightFinder disponible en sanus.com [www.sanus.com/1172]. Coloque la plantilla de la placa mural a la altura que desee y ubique los orificios muescados sobre las líneas centrales del montante. Nivele y marque la ubicación de los orificios.
  • Page 32 Español PASO 3 Fijar el televisor en la placa mural PÁGINA 19 CUELGUE EL TELEVISOR EN LA PLACA MURAL PRECAUCIÓN: Evite posibles lesiones físicas y daños materiales. Para APLICACIONES EN HORMIGÓN: Los soportes de televisor DEBEN estar centrados en la placa mural NOTA: Para APLICACIONES SOBRE MONTANTES DE MADERA, los soportes de televisor se pueden deslizar a cualquier parte de la placa...

  • Page 33: Solución De Problemas

    Español EXTENDER / RETRAER PRECAUCIÓN: Evite posibles lesiones físicas y daños materiales. Los soportes del televisor pueden contener puntos de compresión durante la operación. Mantenga los dedos alejados de los puntos de compresión al retraer el televisor. (observe las flechas) DESPLAZAMIENTO LATERAL DEL TELEVISOR ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso.
  • Page 34 Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.
  • Page 35 Register your new mount and tell us how you like it for a chance to win in our monthly sweepstakes. Entering is quick and easy. Visit SANUS.com/1234 and follow three simple steps for your chance to win. "Monthly Prize" sweepstakes rules and restrictions apply. Visit...
  • Page 36 800-359-5520 • info@sanus.com • SANUS.com SANUS • 6436 City West Parkway • Eden Prarie, MN 55344 USA ©2016 Milestone AV Technologies. All rights reserved. SANUS is a division of Milestone. 6901-002612 00 All other brand names or marks are used for identification purposes and are trademarks of their respective owners.