Motorola CONNECT60 User Manual page 38

General What is the
significance of the
camera LED?
Connectivi- I am not able to
ty issues access my Camera.
Setting Up During setup on de-
vices for Android™
and iOS, I am not
able to find my
Camera during the
last step and the
setup fails.
38
The LED indicates the following
status:
LED flashing Red: Your Camera
is booting up. After a voice
prompt the camera is booted up
and ready for pairing.
LED Cycling Blue/Red: Your
camera is in pairing mode.
LED Solid Blue: The camera
is paired and set up to your
account.
LED Flashing Blue: The camera
is live streaming.
LED Off - No Power to camera.
Please check if the Camera is
within Wi-Fi ® range. Please try
to move the Camera closer to
the router for better Wi-Fi ®
connectivity and try again.
Please reset the Camera to
setup mode and try again. Press
and hold the PAIR button on
the side of the camera until you
hear a beep and voice prompt
'Ready for pairing'. When the
Camera LED is off, this indicates
that it is in setup mode. Now
restart the setup from your
smartphone again.
Help