Table of Contents
Advertisement
Battery Information
The remote control* is powered by one 3V, CR2032 battery. When
the battery begins to weaken, operating range is reduced and the LED
on the remote control dims.
* Some remote controls are powered using two coin cell batteries (CR-
2016), so please verify which type and quantity is used before re-
placing.
Replacing the Battery
Use a small flat blade (flat-head) screwdriver and insert it into the
1.
slot located along the bottom of the remote, near the key ring.
Carefully pry open the case.
Remove the old batteries from the holding clip. Orient the new
2.
batteries for the correct polarity and insert into the holding clip.
3.
Reposition the case parts, then snap together by pressing firmly
and evenly on the front and back.
Battery Disposal
Directed cares about the environment. If you need to dispose
of the battery, please do so in accordance with your munici-
pal requirements for battery disposal or return to Directed.
10
© 2016 Directed. All rights reserved.
Advertisement
Table of Contents
