Table of Contents
Advertisement
1. Connection is loose, please reinsert DRAM again
2. COMS setting is wrong, please reset as default value
3. DRAM performance is getting worse by time. Please swap a new one.
HDD issue
Please reboot from other booting device. If system is booting without any problem, it
shows the hard drive may be crashed. Please swap a new one.
System crash issue
1.
The additional peripheral may be over loading for adapter, and this will cause
system to turn on or turn off sometime. Please check by removing additional
peripheral.
If thermal air hole is blocked, it will cause the system can't drop out heated air
2.
flow, and then system will be crashed. Please keep clean area over 25.4mm(1 inch)
around system air hole.
26
Advertisement
Table of Contents
