Table of Contents
Advertisement
Pairing the TV to the Samsung Smart Control
When you turn on the TV for the first time, the Samsung Smart Control pairs to the TV automatically.
If the Smart Control does not pair to the TV automatically, point it at the remote control sensor of the
TV, then press the ① and ② buttons on the Samsung Smart Control simultaneously for 3 seconds or
more.
Controlling External Devices with the TV Remote -
Using the Universal Remote
(MENU/123)
MENU
You can control external devices connected to the TV using the TV's remote control.
"
You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's
remote control without any additional setup. Refer to "Using Anynet+ (HDMI-CEC)" for more information.
"
Certain external devices connected to the TV may not support the universal remote feature.
Setting up the universal remote control
1.
Connect the external device to control with the universal remote control to the HDMI port on the
One Connect, and then turn on the external device.
2.
Press the
SOURCE
3.
Select the
Universal remote
4.
Follow the directions on the screen to complete the set up and register the device. The directions
will be different, depending on the device you want to control.
"
If the external device does not respond after being registered, register it again using its model number.
"
The TV memorises both the external device and the connection (HDMI 1, HDMI 2, etc.) the device is
connected to.
System
Universal remote setup
button on your remote control to bring up the
setup.
Try Now
Source
screen.
Advertisement
Table of Contents
Troubleshooting
