Kenwood TH-F7A Instruction Manual page 12

3 GETTING ACQUAINTED
Example 1 (100 MHz < f < 1000 MHz)
To enter 438.320 MHz:
Key in
[ENT]
[4], [3], [8]
[3], [2], [0]
Note: You do not have to press [MHz] when you are entering
3-digit MHz number.
Example 2
To enter 439.000 MHz:
Key in
[ENT]
[4], [3], [9]
[ENT]
Example 3
To revise 144.650 MHz to 145.650 MHz:
Key in
[ENT]
[1], [4], [5]
[VFO]
Example 4 (f > 1000 MHz)
To enter 1250.500 MHz (B-band only):
Key in
[ENT]
[1], [2], [5], [0]
[5]
[ENT]
Example 5 (f < 100 MHz)
To enter 10.500 MHz (B-band only):
Key in
[ENT]
[1], [0]
[MHz]
[5]
[ENT]
Note: When pressing the last [ENT], the Fine Tuning function
is automatically activated for 10.5000 MHz.
8
Display
– – – – – –
4 3 8. – – –
4 3 8. 3 2 0
Display
– – – – – –
4 3 9. – – –
4 3 9. 0 0 0
Display
1 4 4. 6 5 0
– – – – – –
1 4 5. – – –
1 4 5. 6 5 0
Display
– – – – – –
5 0. – – –
12
5 0. 5 – –
12
5 0. 5 0 0
12
Display
– – – – – –
1 0 – – – –
1 0. – – –
1 0. 5 – –
1 0. 5 0 0 0
Example 6
To enter 810 kHz (B-band only):
Key in Display
[ENT] – – – – – –
[0] 0 – – – – –
[MHz]
[8], [1], [0]
Note:
◆ If the entered frequency does not match the current frequency
step size, the frequency is automatically rounded down to the
next available frequency.
◆ When the desired frequency cannot be entered exactly, check
whether the Fine Tuning function is ON or not
{page 33}, and then confirm the frequency step size
{page 35}.
◆ Some frequency ranges are blocked, due to government
regulations. Refer to the specifications {pages 50, 51} for the
TX/ RX coverage.
◆ If you turn the Tuning control or press [ ]/ [ ] while entering
the frequency, the transceiver clears the entry and recovers
the previous frequency and mode.
0. – – –
0. 8 1 0