Solutions When The Image Brightness Or Colors Are Incorrect; Solutions When An Afterimage Remains On The Projected Image - Epson PowerLite EB-L200W User Manual

• If you are projecting from a computer, try using a lower resolution or try to match the projector's native
resolution.
Parent topic:
Related references
Image Quality Settings - Image Menu
Related tasks
Focusing the Image Using the Focus Ring
Cleaning the Lens

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Press the Color Mode button on the remote control to try different color modes for the image and
environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as Brightness,
Contrast, Tint, White Balance, and/or Color Saturation.
• Make sure you selected the correct Signal Format setting in the Signal I/O menu, if available for your
video source.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
• Make sure you have run the Light Source Calibration in the Management menu recently. If using
multiple projectors, perform the calibration on all projectors to ensure a consistent image quality.
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Administration Settings - Management Menu

Solutions When an Afterimage Remains On the Projected Image

If you see an afterimage in the projected image, select Refresh Mode > Start in the Management menu.
Parent topic:
Solving Image or Sound Problems
Solving Image or Sound Problems
Solving Image or Sound Problems
226