Removing/Assembling Doors And Drawers - LG LMWC23626 Series Owner's Manual

14 INSTALLATION
2
Place the handle on the door by fitting the
handle footprints over the mounting
fasteners and tightening the set screws
with a 1/8 in. Allen wrench.
• For models shipped with the
handlesdisassembled, use a 3/32 in. Allen
wrench.
Removing/Assembling
Doors and Drawers
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
• Use two or more people to remove and install
the refrigerator doors and freezer drawer.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors and drawer.
• Do not hold the handle when removing or
replacing the doors and drawer as the handle
may come off.
• Tools Needed
- Phillips screwdriver
- Flat-head screwdriver
Removing the Left Refrigerator
Door
1
Remove the screw
the top of the refrigerator. Lift the hook (not
visible), located at the bottom of the front side
of the cover with a flat-head screwdriver.
b
Remove the cover
b
from the hinge cover at
a
2
Disconnect all wire harnesses
ground wire .
d
3
Rotate the hinge lever
Lift the top hinge
latch .
g
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
4
Lift the door from the middle hinge pin and
remove the door.
. Unscrew the
c
counterclockwise.
e
free of the hinge lever
f