Using Your Device In A Vehicle; Using The Car Holder; Connecting The Car Charger - Medion MDPNA 470T User Manual

1.3 Using Your Device in a Vehicle

A car holder and a car charger are supplied with your device.

Using the Car Holder

CAUTION:
Select an appropriate location for the car holder. Never place the holder where the driver's
field of vision is blocked.
If the car's windshield is tinted with a reflective coating, an external antenna (optional) may
be needed to route the antenna to the top of the car through a window. When closing the
car window, be careful not to pinch the antenna cable
The car holder consists of a bracket and a stand. Use the car
holder to fix your device in a vehicle. Make sure that the GPS
antenna has a clear view of the sky. (See the document supplied
with the car holder for the installation instruction.)
For initial positioning, remain at the same spot with a clear view
of the sky. The GPS may take a few minutes to find its current
location initially.
NOTE: Depending upon the specific model purchased, the car holder supplied with your
device may not look exactly the same as the picture shown.

Connecting the Car Charger

The car charger supplies power to your device
when you are using the device in a car.
CAUTION: To protect your device against sudden
surges in current, connect the car charger only after
the car engine has been started.
1. Connect one end of the car charger to the
power connector of your device.
2. Connect the other end to the cigarette lighter in
the car to power and charge your device. The
indicator on the car charger lights in green to
indicate that power is being supplied to your
device.
6