Summary of Contents for Magtek MagneSafe D99875494-52
Page 1
MagneSafe OEM USB READER TECHNICAL REFERENCE MANUAL PART NUMBER D99875494-52 JULY 2017 REGISTERED TO ISO 9001:2008 1710 Apollo Court Seal Beach, CA 90740 Phone: (562) 546-6400 FAX: (562) 546-6301 Technical Support: (651) 415-6800 www.magtek.com...
Page 2
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc. MagTek is a registered trademark of MagTek, Inc.
Page 3
This warranty shall be provided only for a period of one year from the date of the shipment of the product from MagTek (the “Warranty Period”). This warranty shall apply only to the “Buyer” (the original purchaser, unless that entity resells the product as authorized by MagTek, in which event this warranty shall apply only to the first repurchaser).
Page 4
FCC WARNING STATEMENT This equipment has been tested and was found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.
SECTION 1. FEATURES AND SPECIFICATIONS The MagneSafe Readers are compact magnetic stripe card readers that conform to ISO standards. In addition to reading multiple tracks of data from a card, the Readers also include MagnePrint technology. The MagnePrint data will be included with the track data on each transaction. In order to maximize card security, the Readers incorporate data encryption within the head to protect the card contents and MagnePrint information from the point of swipe.
OEM MagneSafe Swipe Reader FEATURES Major features of the Readers are as follows: Hardware Compatible with a PC or any computer or terminal having a USB interface Bi-directional card reading Reads encoded data that meets ANSI/ISO/AAMVA standards ...
Section 1. Features and Specifications REFERENCE DOCUMENTS MagTek Communication Reference Manual for USB MagneSafe V5 Readers (99875475) Axelson, Jan. USB Complete, Everything You Need to Develop Custom USB Peripherals, 1999. Lakeview Research, 2209 Winnebago St., Madison WI 53704, 396pp., http://www.lvr.com.
SECTION 2. INSTALLATION This section describes the connections for USB and the LED. USB CONNECTION Pin numbers and signal descriptions for the USB connector are listed in Table 2-1. The connector on the cable is Molex 501568-0507 or 51021-0500. One possible mating connector is Molex 501330-0500 or 501568-0507.
SECTION 3. OPERATION LED INDICATOR The LED indicator, if equipped, will be either off, red, green, or amber. When the reader is not powered, the LED will be off. When the reader is first plugged in, the LED will be solid amber. After the reader is plugged in, the host will try to enumerate the reader.