Advertisement
HBH34 Quick Start Guide - Inside
Size: 432 x 140 mm
Printing Color: Black
Mat'l: 100 gsm WF paper
Manual Clock Setting
Press and hold the Time Set Button
for 2 seconds to enter clock setting mode.
time set
2 SECS
Press the - or + button to set the time.
Press the Time Set Button to confirm the time. The year
will flash.
time set
Press the - or + button to set the year.
Press the Time Set Button to confirm the year.
The date will flash.
time set
Press the - or + button to set the date. Hold for
rapid adjustment.
Press the Time Set Button to confirm the date
and exit clock setting.
time set
Backup Batteries
Keep unit connected to AC power when
replacing batteries or you will lose settings.
Remove pull tab from Backup Battery Compartment
located on bottom of theunit.
When Low Battery Icon
appears on display,
replace backup batteries with 2 fresh AA
batteries. Make sure polarity (+/–) markings match
illustration.
Once staff has completed setup, replace security
cover on back of unit and tighten thumbscrew.
Reset Button
The courtesy plug on top of the unit is rated for 15
amps. If a guest connects a device that overloads the
outlet, the built in circuit breaker will prevent damage
to the unit. The Reset Button on the back of the unit
will pop out to indicate the outlet was overloaded.
Press and release the Reset Button to reset the circuit
breaker and restore the courtesy plug to operation.
reset
Maintenance
• Place the unit on a level surface away from sources of direct
sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural
wood and lacquered finish. A cloth or other protective
material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild
soap and water. Stronger cleaning agents, such as thinner or
similar materials can damage the surface of the unit.
HBH34QSG-103116-A
© 2016 HTI Industries, LLC. All rights reserved
Printed in China
Advertisement
