Advertisement
19
Install 3 screws to install light pan.
21
Attach glass by locating dimples in
light fixture with the groves in glass
and twisting clockwise till tight.
© 2013 Monte Carlo Fan Company
For fan with light kit go
to step 20-21 to
finish.
For fan without light kit
go to step 22.
22
Attach the non light cover by locating
dimples in the light fixture with the
grooves in the non light kit cover and
twist clockwise till tight. WARNING:
Make sure light bulb is not installed
when using this cover.
5
20
Install 2 x 9.3W medium base
dimmable LED bulbs. California Title 24
compliant bulbs included.
Caution: Approved for use with LED
light bulb only (Part No. 97502S). Do
not use incandescent light bulb.
Caution: Do not replace bulb until it
cools down.
6/15/2013
Advertisement
