Troubleshooting
First, try out the following procedures
If the problem is not resolved, it may be improved by selecting [Reset]
[Setup] menu.
Battery and power source
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
•
The battery is exhausted. Charge the battery.
•
If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Economy] etc.
This unit is turned off automatically.
•
If you connect to a TV compatible with VIERA Link with a HDMI mini cable (optional) and turn the TV
off with the remote control for the TV, this unit is also turned off.
> If you are not using VIERA Link, set [VIERA Link] to [OFF].
Card/battery door does not close.
•
Insert the battery securely all the way in.
Recording
The picture cannot be recorded.
•
Is the mode dial correctly set?
•
Is there any memory remaining on the built-in memory or the card?
> Delete unnecessary pictures to increase the available memory.
•
You may not be able to record for a short while after turning this unit on when using a large capacity
card.
The recorded picture is whitish.
•
The picture can become whitish if there is dirt e.g. fingerprints on the lens.
> If the lens is dirty, turn the camera off, retract the lens barrel and gently wipe the lens surface
with a soft dry cloth.
The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated.
•
Setting the [Min. Shtr Speed] to faster speed might make the picture darker.
> Set the [Min. Shtr Speed]
Others
(P210
to 219).
(P141)
to slower speed.
- 210 -
(P63)
(P66)
(P49)
(P79)
(P65)
on the