Face Settings
You can register information such as names and birthdays for face images of up to 6 people.
Registration can be facilitated by taking multiple face images of each person. (up to 3 pictures/
registration)
Point of recording when registering the face images
∫
•
Face front with eyes open and mouth closed, making sure the
outline of the face, the eyes, or the eyebrows are not covered with
the hair when registering.
•
Make sure there is no extreme shading on the face when
registering. (Flash will not flash during registration.)
When it is not recognising during recording
∫
•
Register the face of same person indoors and outdoors, or with different expressions or angles.
(P131)
•
Additionally register at the location of recording.
•
When a person who is registered is not recognised, correct by re-registering.
•
Face Recognition may not be possible or may not recognise faces correctly even for registered
faces, depending on the facial expression and environment.
1
Select [Face Recog.] on the [Rec] menu and then press 1.
2
Press 3/4 to select [MEMORY] and then press [MENU/SET].
3
Press 3/4/2/1 to select the Face
Recognition frame that is not registered, and
then press [MENU/SET].
4
Take the picture adjusting the face with the
guide.
•
Confirmation screen is displayed. It is executed when
[Yes] is selected.
•
The faces of subjects other than people (pets, etc.) cannot
be registered.
•
When [DISP.] is pressed, an explanation appears for
taking face images.
Recording
- 129 -
(Good example for
registering)
(P52)