Table of Contents
Advertisement
Troubleshooting
Troubleshooting guide
A part or whole of a recorded title has been
lost.
• If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD may become unusable. We cannot
offer any guarantee regarding lost programmes.
An unusually loud sound is coming from the
rotating disc.
• If you want copy to perform more quietly, select
"Normal ( Silent )" in "BD / DVD Speed for High
Speed Copy". (
77, 82)
The time recorded on the disc and the
available time shown do not add up.
• [DVD-R] [+R] If you record or edit many times, the
remaining capacity is reduced and then
recording or editing may be disabled.
• Available disc space display may be different
from actual.
100
VQT4W67
Play
Cannot play back.
• The disc is dirty. (
10)
• The disc is scratched or marked.
• [BD-R] [BD-RE]
Set "Play Video ( AVCHD ) on BD-RE / BD-R" to
"On" and the playback may be possible (
81).
• The disc may not be able to play back if it was
not finalized or a Top Menu was not created on
the equipment used for recording.
Audio and video momentarily pause.
• DVD-R DL and +R DL discs have two writable
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
BD-Video or DVD-Video is not played.
• Ensure the disc is for the correct BD-Video
region code or DVD-Video region number, and
is not defective.
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• "00 RET" is displayed on the unit's display.
2 Repeatedly press [1] (right) until "03 VL" is
displayed on the unit's display.
3 Press [OK].
• "INIT" is displayed on the unit's display.
77,
Advertisement
Table of Contents
