Preparing For Use; Using The Appliance - Philips HR1810/70 Manual

d Lid
E Sieve
F Juice collector
g Spout
H Cord storage facility
i Driving shaft
J Latch
k On/off switch
l Motor unit

preparing for use

1 Wash all detachable parts (see chapter 'Cleaning').
2 To adjust the length of the mains cord, push the mains cord inside the main unit into the
cord storage facility (Fig. 2).
3 Push the spout into the pulp collector ('click'). (Fig. 3)
4 Place the juice collector on the motor unit (Fig. 4).
Always check the sieve before use. If you detect any cracks or damage, do not use the
appliance. Contact the nearest Philips service centre or take the appliance to your dealer.
5 Put the sieve in the juice collector (Fig. 5).
6 Attach the pulp container to the motor unit. You hear a click when it locks into place (Fig. 6).
7 Place the lid on the juice collector (Fig. 7).
Make sure that the hook on the lid fits into the hole of the juice collector.
8 Snap the latch onto the lid to lock the lid and the juice collector into place ('click') (Fig. 8).
9 Place a glass under the spout.
10 Put the mains plug in a wall socket.

using the appliance

The appliance only functions if all parts are properly assembled and the lid is properly locked in
place with the latch.
1 Wash the fruit and/or vegetables and cut them into pieces that fit into the feeding
tube. (Fig. 9)
2 Press the on/off switch to switch on the appliance. (Fig. 10)
3 Put the pre-cut ingredients in the feeding tube and gently press them towards the rotating
sieve with the pusher (Fig. 11).
Do not exert too much pressure on the pusher, as this could affect the quality of the end result. It
could even cause the filter to come to a halt.
Never insert your fingers or an object into the feed tube.
After you have processed all ingredients and the flow of juice into the glass has stopped, switch
off the appliance and wait until the sieve has stopped rotating.
Do not let the appliance run for more than 2 minutes without interruption. If you have not
finished extracting juice, switch off the appliance and let it cool down to room temperature
before you continue.
EnglisH
7