Removing The Cartridge Group; Fig. 61: Removing Cartridge Group 1; Table 46: Tightening Torque (90012-01) - ABB HT611364 Operation Manual

Operation Manual / A150-M56/66/57/67 - A155-M..
10 Dismantling and fitting with removed air inlet and gas outlet / 10.6

Removing the cartridge group

10.6 Removing the cartridge group
Mark the casing position for assembly.
u
Fig. 61: Removing cartridge group 1
Product
A150
A155
Table 46: Tightening torque (90012-01)
1. Treat threads of studs (51006) with penetrating oil and leave to take effect.
2. Loosen nuts (51007) and remove Verbus Ripp® washers (51003) together with the fasten-
ing strips (51002).
3. Fit the cross-piece of the service support (90012). Observe the tightening torque.
© Copyright 2022 ABB. All rights reserved.
Position
01
01
HZTL4032_EN
Tightening torque [Nm]
150
150
Rev.S February 2022