Pioneer YH1824GHFD18R2 Technical & Service Manual page 70

16.
DISASSEMBLY AND ASSEMBLY FOR COMPRESSOR AND MOTOR
Outdoor unit
48K/60K
Important: Before disassembly and assembly, make sure that the power to the system has been disconnected and
verified as voltage free.
Step
1. Remove external casing
2. Remove motor
3. Remove gas liquid
separator
4. Remove compressor
5. Assemble unit
Illustration
66
Handling Instruction
1. Remove the top cover, handle and
valve cover.
2. Remove the outer case and right
side plate.
1. Remove the blade nut and then
remove the blade.
2. Remove the motor from motor
supporter.
1. Reclaim the refrigerant from the
entire system.
2. Unsolder the 4-way valve piping assy
from gas liquid separator.
3. Remove the gas liquid separator.
1. Reclaim the refrigerant from the entire
system.
2. Unsolder the 4-way valve piping assy
from compressor.
3. Remove the compressor mounting
bolts.
4. Carefully remove the compressor from
chassis.
Assemble the unit in the reverse
order of disassembly.