Philips FC9310/02 Manual page 11

Dustbag
Note: In some cases, the dustbag-full indicator can indicate that the dustbag
is full, even though it is not. This may occur if the pores of the dustbag are
clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust and
similar substances) or if something is blocking the nozzle, tube and/or hose.
If the pores of the dustbag are clogged, you have to replace the dustbag, even
if it is not full yet. If the dustbag is not clogged but not full either, something is
blocking the nozzle, tube and/or hose. In this case, do not replace the dustbag
but remove the obstruction.
- Replace the dustbag as soon as the dustbag-full indicator has changed
colour permanently, i.e. even when the nozzle is not placed on the
floor.
1 Pull the cover upwards to open it.
2 Lift the dustbag holder out of the appliance.
Make sure you hold the holder with the dustbag in horizontal position
when you lift it out of the appliance.
3 Pull at the cardboard tag to remove the full dustbag from the holder.
When you do this, the dustbag is sealed automatically.
,
You can dispose of the full dustbag with the normal household waste.
,
4 Slide the cardboard front of the new dustbag into the two grooves of
the dustbag holder as far as possible.
English
11