Cable Service with VCR Hookup
Connect cable service and a VCR to the LCD TV/Monitor.
Locate the Antenna/Cable jack on the
1
back of the VCR.
Connect the cable service wire to the VCR.
Connect other wires according to the
2
diagram to the right.
After all connections are complete, plug
3
in the TV. The LCD TV/Monitor is designed
to operate on AC power.
For cable box operation, leave the VCR
and the television tuned to channel
three or four and use the cable box to
change channels.
Connections Panel
P A G E 1 2
Cable TV
Cable TV
Wall Jack
Wall Jack
Cable Box
VCR AV Panel