Cable Service - Zenith L26W58HA Installation And Operating Manual, Warranty

Cable Service Hookup
Connect cable service to the LCD TV/Monitor.
Locate the Antenna/Cable jack on the
1
back of the TV.
Connect the cable wire to the
2
Antenna/Cable jack according to one
of the diagrams to the right.
After all connections are complete,
3
plug in the TV. The LCD TV/Monitor is
designed to operate on AC power.
For cable box operation, leave the television
tuned to channel three or four and use the
cable box to change channels.
Mini glossary
75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire sticking
through the middle, and it screws onto the threaded jack on the back of the TV.
300 TO 75 OHM
A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack. They are usually about an inch long with two screws
ADAPTER
on one end and a round opening with a wire sticking out on the other end.
P A G E 1 0
Cable TV
Wall Jack
Connections Panel
RF Coaxial
Wire (75 ohm)
Cable TV
Wall Jack
Connections Panel
Coaxial Wire RF
(75 ohm)