Saeco RI9946/47 Operation And Maintenance Manual page 34

26
USer menU
7
17/05/09
3.3.1. EDIT USER
66%
PLEASE PUT FINGER
The machine requests you to put on
the sensor the same fi nger you used for
the previous two readings in order to
perform the third reading .
Only the saved fi nger can then be used to select your user. To use another fi nger, perform a new Fingerprint Enable
procedure.
This function allows you to display the name instead of the icon.
1
3.3.1. USER EDIT
ESC
EDIT NAME USER1
FINGERPRINT ENABLE OFF
NAME ENABLE OFF
OK
Select the function and press the "OK"
button .
8
17/05/09
3.3.1. EDIT USER
66%
PLEASE REMOVE FINGER
Remove your fi nger from the sensor
when requested. Wait....
If the symbol is displayed,
you have to perform the
procedure again . In this case it
is suggested to change fi nger
for the Fingerprint Enable
procedure .
NAME ENABLE
2
3.3.1.3. USER EDIT
NAME ENABLE
ESC
OFF
ON
OK
Select "ON" to activate the function.
9
3.3.1. USER EDIT
The machine confi rms that all data
have been read and correctly saved .
3
17/05/09
USER BEVERAGE
MENU MENU
USER1
SELECTED SETTINGS
MENU
USER
04:17 pm
When the function is active, the name
will be displayed instead of the icon.