Cappuccino - Philips HD8856/04 Operating Instructions Manual

16

CaPPUCCIno

ProDUCt BreWInG
AT THE BEGINNING OF THE DISPENSING PHASE, THE MACHINE MAY PRODUCE SOME SPURTS OF MILK AND
STEAM: RISK OF SCALDING! ALWAYS WAIT FOR THE CYCLE TO END BEFORE REMOVING THE CONTAINER.
REFER TO THE SECTION "MILK CARAFE USE" (SEE PAGE 12).
When brewing milk products, the machine dispenses the milk fi rst and then brews the coff ee.
1
Place the cup or the container where the
milk-based product will be prepared.
4
CAPPUCCINO
PLEASE WAIT ...
The machine starts brewing: it grounds
the coff ee and warms up to dispense milk.
In this case the ECOMODE function is set to
"ON" (see page 26).
The machine requires a certain waiting time because the ECOMODE function is activated to allow energy saving.
Preparing cappuccino and other milk beverages can be a quicker operation if the ECOMODE function is deactivated; this, however, at the
This function can only be deactivated by means of the "MACHINE MENU" (see page 26).
In this case, simultaneously brewing a double product is not possible.
2
Rotate the handle upper part of the
container on the cup. To avoid spilling
milk, always use cups of adequate size.
5
CAPPUCCINO
Milk dispensing begins. This operation
can be stopped by pressing "STOP".
expense of energy saving.
3
Select the desired milk product by
pressing the corresponding button: you
can select only one milk product at a
time.
6
CAPPUCCINO
STOP
STOP
Once milk has been dispensed, the
machine starts brewing the coffee. This
operation can be stopped by pressing
"STOP".