Advertisement
INSTALLATION GUIDE
Contents
Overview .......................................................................................................................................................
Tools Required .............................................................................................................................................
Parts .............................................................................................................................................................
Installations ...................................................................................................................................................
DIN Rail Install ..........................................................................................................................................
Velcro Install ..............................................................................................................................................
Self-Tapping Screw Install ..........................................................................................................................
Additional Help and Support .........................................................................................................................
Overview
This is a quick installation guide on how to install the ATS-SS-64V-10KA-10GBPS-BT Ethernet surge suppressor. The Ethernet surge
suppressor can be attached a few different ways and each is described in detail. In all applications, the suppressor must be properly grounded
to be effective. The suppressor is bi-directional, so it does not matter which of the two RJ-45 ports is used as the input or output port in a
setup.
Tools Required
Phillips Screwdriver (PH#2)
Drill [Only for Self-Tapping Screw Install]
5-40 (U.N.C.) Drill bit or 5-44 (U.N.F.) Drill bit [Only for Self-Tapping Screw Install]
Parts
(1) ATS-SS-64V-10KA-10GBPS-BT Ethernet Surge Suppressor
(1) Green DIN Rail Clip
(2) Din Rail Clip Screws (PH#2)
(1) Black DIN Rail Attachment Bar
(2) DIN Rail Attachment Bar Screws (PH#2)
(1) 3" Adhesive Velcro Hook and Loop Tape
(2) Self-Tapping Screws (PH#2)
The facts and figures herein are carefully compiled to the best of our knowledge and are intended for general informational purposes only. Responsibility
for the use and application of AccelTex Solutions materials rests with the end user. All AccelTex Solutions products are sold pursuant to the AccelTex
Solutions Terms and Conditions of Sale. © 2018 AccelTex Solutions. All Rights Reserved. AccelTex, AccelTex Solutions, the AccelTex Solutions Logo and
other marks are trademarks or registered trademarks of AccelTex Solutions.
ETHERNET SURGE SUPPRESSOR GUIDE
ATS-SS-64V-10KA-10GBPS-BT
(ATS-SS-64V-10KA-10GBPS-BT)
2
2
2
2
3
3
6
8
9
1.888.406.8906
SALES@ACCELTEX.COM
Advertisement
