Table of Contents
Advertisement
Optional: Adding an External Temperature Probe (Wireless Envoy Only)
two models: 6475 (with stainless steel housing) or 6477 (with durable plastic
housing).
Simply plug the RJ connector of the temperature probe into the RJ jack on the
Envoy.
RJ
External
Jack
Temperature
Sensor
RJ
Connector
Note:
Note: It may take several minutes for the temperature reading to stabilize.
If the Envoy is mounted outside in a weather-proof shelter, you should thread
the probe cable up through one of the holes in the base of the shelter. See your
shelter manual for instructions on how to secure the cable and make a weather-
proof seal.
7
Advertisement
Table of Contents
