Page 1
COMMETER C3120 Digital thermometer-hygrometer Instruction manual...
Page 2
Manual for use of thermometer-hygrometer COMMETER C3120 Instrument is designed for measurement of temperature and relative humidity with the possibility of displaying the dew point temperature. Measured values are displayed on a dual line LCD display. Temperature is measured by RTD sensor Ni1000/6180ppm. Instrument compares measured values of temperature, humidity and dew point with two adjustable levels for each measured quantity.
Page 3
Pressing MIN (MAX) or MENU key again to return to default mode. Minimum and maximum memory is cleared from menu after confirmation selection CLR (see below). Values in HOLD, MIN and MAX memories remain stored even after instrument is switched OFF. IE-COM-C3120-07...
Page 4
FAST mode is out of operation to reduce current consumption independently on this selection. Each pressing of ENTER key causes displaying of service information on software version (upper LCD line) together with instrument configuration on the LCD lower line. Alarm indication and setting IE-COM-C3120-07...
Page 5
It is possible to leave the alarm setting mode by pressing MENU key. New adjusted limits up to pressing MENU key are stored in memory. After pressing ENTER key it is possible to set alarm limits for dew point temperature. Battery replacement IE-COM-C3120-07...
Page 6
(levels 4/8 kV, class A) EN 61000-4-3 (intensity of electromagnetic field 3 V/m, class B) EN 61000-4-4 (levels 1/0,5 kV, class A) EN 61000-4-6 (intensity of electromagnetic field 3 V/m, class B) EN 61000-4-11 (class A) EN 61000-4-5 (class A) IE-COM-C3120-07...
Need help?
Do you have a question about the C3120 and is the answer not in the manual?
Questions and answers