Download Print this page

Electromagnetic Fields (Emf) - Philips HP4990/00 User Manual

Salondry pro hairdryer
Hide thumbs Also See for HP4990/00:

Advertisement

If the mains cord is damaged, you must have it replaced by
Philips, a service centre authorised by Philips or similarly qualified
persons in order to avoid a hazard.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
For additional protection, we advise you to install a residual
current device (RCD) in the electrical circuit that supplies the
bathroom. This RCD must have a rated residual operating
current not higher than 30mA. Ask your installer for advice.
If the appliance overheats, it switches off automatically. Unplug
the appliance and let it cool down for a few minutes. Before you
switch the appliance on again, check the grilles to make sure they
are not blocked by fluff, hair, etc.

Electromagnetic fields (EMF)

This appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions
in this user manual, the appliance is safe to use based on scientific
evidence available today.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in at
an official collection point for recycling. By doing this,
you help to preserve the environment.
EN

Advertisement

loading

This manual is also suitable for:

Hp4993Hp4992Hp4991Hp4990