Table of Contents
Advertisement
Controls & Features
Trip Reset Switch
The trip reset switch is used to switch
between the odometer and the two
tripmeter (A & B) displays. To operate,
press the switch.
To reset (zero) either tripmeter, press and
hold the switch for about 2 3 seconds
until the display changes to zero.
The trip reset switch is also used to switch
the blinking of the immobilizer system
(HISS) indicator on or off. To operate,
simultaneously press and hold the trip
reset and illumination switches (page
until the HISS indicator lights.
36
Instruments & Controls
−
31
)
The trip reset switch is also used to change
the speed and mileage units for the
speedometer/odometer/tripmeter. To
change the unit, press and hold the switch
(page
25
).
Advertisement
Chapters
Table of Contents
