Honda NRX1800 2004 Owner's Manual page 119

Final Drive Oil
5. Remove the oil filler cap ( ).
6. Check the oil level. It should be flush
with the lower edge of the oil filler hole
( ). 6
If the level is low, check for leaks. Add
the recommended oil through the oil
filler hole until it reaches the lower
edge of the opening.
7. Apply a thin coat of gear oil to the O-
ring of oil filler cap.
8. Install the oil filler cap and tighten to
the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
9. Install the final gear cover. Tighten the
bolts B to the specified torque:
7 lbf·ft (9.8 N·m , 1.0 kgf·m)
10. Install the muffler cover bolts, washers
and tighten to the specified torque:
10 lbf·ft (14 N·m , 1.4 kgf·m)
11. Install the right side covers.
110
Servicing Your Honda
5
RIGHT REAR
(5)
(5) oil filler cap
(6) oil filler hole
(6)