Using Memory Programming; Using The Start/30 Sec.+ Button - Samsung EM-W1100 Instruction Manual

sanyo.fm Page 9 Thursday, January 6, 2005 5:52 PM
Operation
Multi-Stage Cooking
1
Upon pressing the Program button, the oven will enter the
Program mode. The display will be cleared.
2
Using the Number buttons, enter the program number from 1 to 20.
3
Then, press the Power Level button to select power. By pressing
the Power Level button repeatedly, you can select the power level
- HI, MED, or LO.
4
Use the Number buttons to enter the cooking time. You can set a
time from one second to 30 minutes. To set a time over one minute,
enter the seconds as well. For example, to set 10 minutes, enter 1,
0, 0, 0.
5
Repeat steps 3 and 4 for stage II or III memory programming.
6
Press the Program button to complete setting the memory. The
display will show "0" or the present time (if the time is set).
Note: The maximum allowable cooking time is 30 min. The sum
of programmed memory stage cooking time must not
exceed 30 min. If the time exceeds 30 min, the display will
show "E3". Press the Stop/Clear button and retry the
steps.

Using Memory Programming

1
Press the Number buttons to select user-programmed memory
functions (please refer to Memory Programming) from 1 to 20. The
oven will start instantly without pressing the Start button.

Using the Start/30 sec.+ button

This button offers a convenient way to heat food in 30 sec. increments at
the High power level.
1
Press the Start/30 sec.+ button once for each 30 sec. you wish to
cook the food.
For example, press it twice for one minute. The time will display,
and the oven starts automatically.
Add 30 seconds to a program in progress by pressing the Start/30
sec.+ button for each 30sec. you want to add.
9