Hide thumbs Also See for SM-316:

Advertisement

Quick Links

01.SM-308-GB
1/3/02 6:27 PM
User's Guide
FCC Compliance
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
deter-mined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Page 1
COMBO DRIVE
SM-316

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SM-316

  • Page 1 01.SM-308-GB 1/3/02 6:27 PM Page 1 COMBO DRIVE SM-316 User's Guide FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    Technical Specifications ........15 your dealer or local SAMSUNG representative for all repairs.
  • Page 3: Your Combo Drive

    01.SM-308-GB 1/3/02 6:27 PM Page 4 Your Combo Drive Upgrading the Firmware Flash Memory The product firmware can be upgraded by downloading the updated file from the following Web site: http://www.samsungodd.com www.samsungelectronics.com System Requirements Before you install the COMBO drive, we strongly recommend that you check that your setup meets the system requirements listed below.
  • Page 4: Connecting The Cables

    01.SM-308-GB 1/3/02 6:27 PM Page 6 Connecting the Cables 1. Power cable You already have an additional IDE device installed in your computer. 2. Master/slave select terminal Second IDE cable First IDE cable 3. IDE cable 4. Audio cable Mother board Connecting the power cable COMBO...
  • Page 5: Installing The Cd Record Utility

    Edit the AUTOEXEC.BAT file. Add the C:\SAMSUNG\MSCDEX /D:SSCD000 entry. The SAMSUNG device driver enables discs in the COMBO drive to be read but not recorded in an MS-DOS environment; the driver is located in the D driver - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - folder on the CD record utility disc.
  • Page 6: Using The Combo Drive

    01.SM-308-GB 1/3/02 6:27 PM Page 10 Using the COMBO Drive To play audio or video CDs and/or DVDs in your COMBO drive, proceed as follows. Do not touch the surface of a disc; hold it by the Push the power button and boot the computer. edges.
  • Page 7: Recommended Disc Types

    SM-308 COMBO drive. You can change the region code up to reduce the record speed. five times via an MPEG application. Please contact your dealer or local SAMSUNG representative if you Others wish to change the local code more than five times.
  • Page 8: Solving Technical Problems

    01.SM-308-GB 1/3/02 6:27 PM Page 14 Solving Technical Problems Technical Specifications SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without Problem Meaning / Solution notice. The COMBO drive is not Check that the power, audio and IDE cables are detected by the computer.

Table of Contents