To upgrade the device software
1 Connect an SD card to your computer.
2 On your computer, go to support.dell.com and follow the
instructions to download the software upgrade package
"update.pkg" to the SD card.
NOTE:
"update.pkg". Rename the downloaded package to "update.pkg" if it is
not named so.
3 Disconnect the SD card from the computer and install the SD
card into the device.
4 Follow steps 1 and 2 in To restore your device to the factory
default state to turn on the configuration menu.
5 Press the volume up button
update.pkg on SD card option, and press the power button
to confirm your selection.
6 Press the power button
software package.
7 Wait for the device to load files and reboot the system.
132
Troubleshooting
The device only recognizes the software upgrade package as
to move the highlight bar to the Software upgrade via
or the volume down button
to confirm and start upgrading the